Redditch Planning Applications

T1 Turkey Oak (Quercus cerris) Proposed Works Height Reduction: Reduce overall height by approximately 4 metres. Crown Spread Reduction: Reduce lateral spread by approximately 2 metres. Crown Thinning: Selective thinning of the crown (approx. 15???20%) to remove crossing, suppressed, and weak branches. Justification The tree currently overshadows the property roof, significantly reducing available light. The property owner intends to install solar panels; improved light penetration is essential for efficiency. Works are intended to balance amenity value with practical use of renewable energy. The proposed reduction is modest, retaining the tree???s natural form and amenity contribution to the landscape. Compliance with BS3998:2010 Reduction cuts will be made back to suitable growth points, maintaining branch structure and avoiding flush cuts. Thinning operations will focus on removing poor-quality, crossing, or competing branches to improve crown structure and airflow. Wound size will be minimised, avoiding cuts greater than one-third of the parent branch diameter. Overall balance of the crown will be maintained to preserve the tree???s natural shape and stability. Wildlife considerations: Works will avoid nesting season and comply with the Wildlife and Countryside Act 1981. Additional Notes All works will be carried out by qualified arborists with appropriate insurance. Debris will be removed from site and disposed of responsibly. No works will affect the tree???s rooting area.

New patio doors to rear elevation, side door to be replaced with window and new side door to serve utility room.

T1 Oak reduce upper crown down to bottom of large dead section, Reduce southside closest to house by up to 3mtrs Reduce east side by up to 2mtrs Reduce lateral on north/easterly side by 3mtrs All pruning to try and balance crown to a more even canopy and to reduce overall end weight, Thin internal epi growth by 25% Large fungal bracket at base with evidence of internal cavity.

Re-pollard of ash tree. Tree currently stands at approximately 70 foot tall. Upward/outward growth measuring approx. 15-18 feet needs to be taken off back to the site of previous pollard. Ash will stand at approx 40-55 feet tall after re-pollarding (bearing in mind some main limbs lower on tree than others) Tree has a TPO on it. Re-pollarding to reduce size of what is a very large tree in a relatively small garden, eliminate overhang on neighbouring properties and maintain health of tree over time. David Whittle of the Council has been out to inspect and given authorisation to put in planning app.

Formation of mezzanine floors and associated external alterations

T1 Oak The tree is located in the gardens of the above property.It was reduced 5 years ago. We are wanting to remove new growth and deadwood ONLY.

Single storey flat roof rear extension projecting 6m with an eaves height of 2.7m and overall height of 3m.

First floor extension over existing garage. Single storey rear extension

Formation of habitable room in roofspace with front and rear velux rooflights

Ash Tree to rear garden. Inonotus Hispidus infection and poor health. Fell Tree.

eunal -- works required.xls (description of tree and works to be caried out) eunal court conservation application map.pdf (location of trees) please see attached

T1 Ash located in rear garden of 46 Chesterton, our client at 47 would like 1lower branch removed back to stem the next one up pruned back to relevant growth point and 2 smaller branches that have been swallowed up by a creeper either removed or reducing back if any relevant live growth points.

Oak in rear garden - reduce, thin and deadwood. ??? Crown reduction by 20% ??? Thin the crown by 20% this is to include the removal of the deadwood ??? Cut back of the section by the property by 2 metres to balance the crown. Sketch plan OS ref SP 050 654 - T4 on key The tree is overgrowing and stopping natural light entering the property at the rear.

Proposed new dwelling, with associated access drive, garage and gardens

Oak Tree - T24 under TPO No.71 (1991) - Remove overhang branches from tree in front garden of property that over hang the buildings roof. Cutting back by at least 1-2m to a suitable growth point to match the previous work, that has been carried out on the neighbours side of the same tree.

T1 oak tree located to the rear of property in Woodland. request to crown thin by 30% by removing internal epi growth.

T1 Cedar, deadwood entire crown, lift/reduce lateral away from garage roof to create 2.5mtr clearance, cutting back to relevant growth points, lift over road where needed to create 5.1mtr height clearance.

Removal of conservatory and erection of single storey extension; window changes to front and side elevation